Автоматизация / A1D
A1D00118020S02
Package for optimised placement of 0201 components (size 0.6 x 0.3mm) regarding dpm rate and pick up rate. Suitable for all SIPLACE S-27 HM, HS-xx and HF-Series. The Package includes: High resolution DCA-camera, 24 x Nozzle type 906 "oval" tip, 0201 Handbook. The component spectrum for the DCA-Camera is 0201 up to 13mm x 13mm. When using the nozzle type 906 the use of the component sensor is mandatory (item number: 118021). The component sensor can only be used at a 12-Segment Collect and Place Head and requires the modular head board. One 0201 Package and one component sensor per Head is required. In addition the special 3x8mm 0201 feeder module is necessary for any 0201 placement (item number: 141099). System requirement: Station computer >= 503.01 .Line computer >= 503.01 or SIPLACE PRO 1.3
A1D00116046
Fixed conveyor rail, right side for SIPLACE F5 HM and Compact. PCB-dimen sions(LxB):Standard 50mm x 50mm to 508mm x 460mm. Item has to be ordered with the placement station.
A1D00118021
The component sensor as additional optical sensor module verifies the presence / absences of a small component short just before placement / pickup respectively. Suitable for all SIPLACE S-27 HM, HF/X/D-Series and HS-xx in combination with the 12-Segment Collect and Place Head. One Package per Head is required. The component sensor requires the modular head board. This might have to be retrofitted at SIPLACE S-23 HM item no. 359488 (and in field upgraded SIPLACE S-25 HM) and SIPLACE HS-50 item no. 359489. When using the nozzle type 906 for 0201 placement the sensor is mandatory. System requirement: Station computer >= 503.01 .Line computer >= 503.01 or SIPLACE PRO 1.3.
A1D00116065
GEM Data Interface SIPLACE F5 HM, (M54) Version 407.xx Communication pro tocol via Ethernet LAN to transmit production data. Control/record produ ction, control/record process parameters between a host computer and SIP LACE F5 HM placement station. Complete implementation of the GEM standar d to SEMI while complying with the GEM compliance statement.
A1D00118300
With the Option Retrofit Vacuumpump SIPLACE S-25 HM a SIPLACE S-25 HM ca n be connected to an external Vacuumpump. This reduces the air consumpti on to 200 NI/min. To guarantee the specification of SIPLACE S-25 HM the vacuumpump must fulfill the specification of Siemens. More details from the respective Sales or Service representative.
A1D00116161
Nozzle changer for 12-Segment Collect and Place Head SIPLACE F5 HM. Stat ion software version 402.xxx and later. Line software version 402.xxx an d later. Option includes: 7 magazines, each for 12 nozzles.
A1D00116365
SIPLACE SMALL-Server: Processor P4, 2.2 GB Memory, 2x160 GB Hard Disc, DVD RW, 19 inch monitor, 2 Ethernet Cards, Windows 2003 Server English. Suitable for SIPLACE Pro and/or SIPLACE Explorer.
A1D00119314
Underfloor conveyor Productivity Lift with dual conveyor for SIPLACE HS-xx/D4/HF/X-Series/D3 with automatically width adjustment (50mm-216mm).
A1D00116366
SIPLACE Pro Desk Computer: Processor P4, 2.2 GB RAM, 2 x 160 GB Hard Disc, DVD RW, 19 inch monitor, Windows XP Workstation English, 2 Ethernet Cards.
A1D00119316
Underfloor conveyor Productivity Lift with single conveyor for SIPLACE HS-xx/D4/HF/X-Series/D3 with automatic adjustment (50mm-460mm)
A1D00116372
Basic Software package SIPLACE Pro V2.1 for SIPLACE 407/502/503/504/505 Station Computer Software includes: 1 SIPLACE Pro Server, 1 Line Control Server, 1 SIPLACE OIS Server, 1 SIPLACE Pro Client Site License, 1 OIS Client Site License, 1 SIPLACE Pro Optimizer, 1 SIPLACE Pro Download, 1 SIPLACE Pro Backup Tool (doesn't include hardware). Microsoft MSDE and S P3a supporting 7 stations and 1 desk. Additional support provided by 16 9590 SQL Server.
A1D00119330
This item is required one time per SIPLACE HS-50 with dual lane transpor t, for installation of one or more PCB-barcode readers (1D-reader or 2D- reader heads). The following items are included:Mounting bracket (2 pcs) ,Distribution board (1 pcs),Assembly material and cabling,Additionally, one or more PCB-Barcode Readers (item 119679 or 119682) are needed.
A1D00119330-01
This item is required one time per SIPLACE HS-50 with dual lane transport, for installation of one or more PCB-barcode readers (1D-reader or 2D-reader heads). The following items are included: Mounting bracket (2 pcs), Distribution board (1 pcs), Assembly material and cabling, Additionally, one or more PCB-Barcode Readers (item 119679 or 119682) are needed.
A1D00119441
AVSP (Automatic Vacuum Support Pins) Retrofit kit for a placement station SIPLACE HS-60/D4 with double conveyor. Consisting of electrical and pneumatically set, control unit, conversion board and programming box. This retrofit kit must be ordered 1 time per placement station SIPLACE HS-60/D4 with double conveyor. Additionally per lifting table there are up to 3 x Pin Module AVSP SIPLACE HS-60/D4 (119639) required.
A1D00116427
Waffle-Pack Changer for SIPLACE F5 HM combined with fixed component tabl e for transport height 830mm. Version for 230/110V. Storage capacity of 28 WTC (Waffle Pack Tray Carrier), max. size of Waffle Pack Tray 240mm x 340mm x 13mm. Tray changeover time 2.5s. 10 feeder locations required f or Waffle-Pack Changer, related to righthand side of transport direction .
A1D00119643
Adapter device feeder changeover table (119622) SIPLACE HF/X-Series/D3, for reel holders (item no:141204) of 3x8mm feeders (item no:141098, 141099).
A1D00116503
This package includes following SW products: SIPLACE Pro/OIS Station Package, SIPLACE Explorer Stationspaket, SIPLACE Setup Center Station Package. The package is required one time per SIPLACE station.
A1D00119405-01
Long Board Option for SIPLACE HS-50: with this Option we can handle pcb's up to 610mm x 460mm (24 inch x 18 inch) in the single conveyor mode. This option can be used for single and dual conveyor systems.
A1D00119406
With the Option Retrofit Vacuumpump HS-60/D4 a SIPLACE HS-60/D4 can be connected to an external Vacuumpump. This reduces the air consumption to 400 NI/min. To guarantee the specification of SIPLACE HS-60/D4 the vacuumpump must fulfill the specification of Siemens. More details from the respective Sales or Service representative.
A1D00119654-01
The Re-Configuration Kit Highforce Head is necessary to exchange the Collect and Place Head of a placement machine of SIPLACE HF-Series by an Highforce TwinHead. The Highforce TwinHead is a modified TwinHead, which is able to reach placement forces up to 30N (+/-15%) with SIPLACE HF-Series. The kit includes: two Highforce Pick and Place Modules, one stationary camera system, one nozzle changer with three standard magazines (dual garage) and one magazine for customized nozzles, head protection cover, servo-cards, head adaptor boards, cables, additional parts, one software CD, tools for head exchange, box for replaced head and a technical manual. Customer service is not included.Preconditions:Line software Siplace Pro 2.1SP2 or higher, Station software 505.03 or higher.
A1D00190844-01
Retrofitting Instructions SIPLACE Retrofitting Kit for Cutting Device, Edition 07/96 German+English
A1D00193910-05
Installation Manual, Installation of SQL Server 2000 Edition 04/2006, English
A1D00193911-03
Installation Manual Migrate MSDE Database to SQL 2000 Standard Version Edition 05/2004, English
A1D00190862-10
Description of Softwareversion Firmware BOV1030A.HEX, V003.10, German+Englisch
A1D00193912-01
Installation Manual "Prepare Domain workstation for SIPLACE Pro Client operation" Edition 07/2003 english
A1D00190867-01
Retrofitting Instructions SIPLACE 80F/W3 (Driver at the Wafflepack- Changer, Edition 8/96, German+English
A1D00193915-01
Retrofitting Instructions SIPLACE, PSA Kit for feeder modules 8/12/16 mm S Edition 10/2003, German + English